MatrixAir FlushMount2000 Flush-Mount Smoke Eater — 1,650 CFM

The flush-mount workhorse for large rooms with suspended ceilings and heavy loads: restaurants, bars, nightclubs. 1,650 CFM behind a ceiling grille, with 18 inches of clearance above the tiles.

Triple filtration, not an electrostatic cell

Every MatrixAir unit runs the same three stages: a polyester pre-filter for the coarse load, activated carbon for odor and gas, and MatrixAir's Proprietary High Efficiency (PHE) pleated media, which the manufacturer rates at 90–95% of particles down to 0.3 microns. Nothing to wash: all three stages are disposable, and a one-year supply is in the box.

Key specs

• Airflow: 1,650 CFM, dual speed
• Sizing guide: about 1,850 sq ft at 6 air changes per hour with 9 ft ceilings (our calculation from the rated CFM; cigar lounges usually want 8–10 ACH, so size up)
• Cabinet: 46.5" L × 23.75" W × 17" H, 135 lb
• Electrical: 120 V / 60 Hz · 9 A · 1,080 W · ½ hp · dual speed
• Noise: 67 dB at 5 ft
• Finishes: White, Black
• Optional 6" Carbon V-Bank for heavy odor loads (select above)
• ETL listed (Intertek). Made in Warner, New Hampshire

Filters and upkeep

Pre-filter: replace monthly (every 3–4 weeks). Carbon pads: replace every 8 weeks. Proprietary High Efficiency filter: replace yearly. Each unit ships with a one-year supply (12 pre-filters, 6 carbon pads, 1 PHE filter); the matching MatrixAir filter kit is the yearly refill. Yearly refill: the MatrixAir FlushMount Filter Kit.

Installation

Drops into a standard 2×4 ft suspended-ceiling grid and needs 18" of clear space above the drop ceiling. Plugs into a standard 120 V outlet. MatrixAir recommends a licensed contractor or electrician for the install.

Replaces the discontinued MatrixAir Flushmount 20.0.