MatrixAir FlushMount22 Flush-Mount Smoke Eater — 850 CFM

The FlushMount1000's performance in a 22-inch-wide cabinet, so it fits between 24-inch on-center framing where a standard drop-ceiling unit will not. Front panel door for filter changes.

Triple filtration, not an electrostatic cell

Every MatrixAir unit runs the same three stages: a polyester pre-filter for the coarse load, activated carbon for odor and gas, and MatrixAir's Proprietary High Efficiency (PHE) pleated media, which the manufacturer rates at 90–95% of particles down to 0.3 microns. Nothing to wash: all three stages are disposable, and a one-year supply is in the box.

Key specs

• Airflow: 850 CFM, dual speed
• Sizing guide: about 950 sq ft at 6 air changes per hour with 9 ft ceilings (our calculation from the rated CFM; cigar lounges usually want 8–10 ACH, so size up)
• Cabinet: 46.5" L × 23.2" W × 12" H, 85 lb
• Electrical: 120 V / 60 Hz · 4.2 A · 504 W · ¼ hp · dual speed
• Noise: 65 dB low / 67 dB high at 5 ft
• Finishes: White, Black
• Optional 6" Carbon V-Bank for heavy odor loads (select above)
• ETL listed (Intertek). Made in Warner, New Hampshire

Filters and upkeep

Pre-filter: replace monthly (every 3–4 weeks). Carbon pads: replace every 8 weeks. Proprietary High Efficiency filter: replace yearly. Each unit ships with a one-year supply (12 pre-filters, 6 carbon pads, 1 PHE filter); the matching MatrixAir filter kit is the yearly refill. Yearly refill: the MatrixAir FlushMount Filter Kit.

Installation

Drops into a standard 2×4 ft suspended-ceiling grid and fits 24" on-center framing; front panel door for filter changes. Plugs into a standard 120 V outlet. MatrixAir recommends a licensed contractor or electrician for the install.